Steps
1. Insert the optical drive into the ODD bracket.
2. Replace the single M2x3 screw securing the optical drive to the bracket.
Next steps
1. Install the
HDD/ODD
2. Install the
3.5 in.
HDD.
3. Install the
side
cover.
4. Follow the procedure in
Memory module
Removing the memory modules
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
HDD/ODD
About this task
The following images indicate the location of the memory modules and provide a visual representation of the removal procedure:
Steps
1. Lay the chassis on the right side.
2. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot.
3. Grasp the memory module near the securing clip, and then gently ease the memory module out of the memory-module slot.
NOTE:
Repeat step 2 to step 4 to remove any other memory modules installed in your computer.
bracket.
After working inside your
Before working inside your
bracket.
computer.
computer.
Disassembly and reassembly
29