Image:
Steps
1. Remove the screw (M2x3) that secures the 2280 solid-state drive to the system board.
2. Slide and lift the solid-state drive from the M.2 card slot on the system board.
Installing the 2280 solid-state drive
Prerequisites
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the 2280 solid-state drive and provides a visual representation of the installation
procedure.
Disassembly and reassembly
37