Steps
1. Locate the notch on the 2230 solid-state drive.
2. Align the notch on the 2230 solid-state drive with the tab on the M.2 card slot.
3. Slide the 2230 solid-state drive into the M.2 card slot on the system board.
4. Replace the screw (M2x3) that secures the 2230 solid-state drive to the system board.
Next steps
1. Install the
HDD/ODD
2. Install the
side
cover.
3. Follow the procedure in
M.2 2280 Solid state drive
Removing the 2280 solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
HDD/ODD
About this task
The following images indicate the location of the 2280 solid-state drive and provide a visual representation of the removal
procedure.
36
Disassembly and reassembly
bracket.
After working inside your
Before working inside your
bracket.
computer.
computer.