SD card
Removing the media card reader
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
HDD/ODD
About this task
The following images indicate the location of the front cover and provide a visual representation of the removal procedure.
Steps
1. Unroute the PSU power cable from over the SD card reader.
2. Remove the two M3x5 screws securing the SD card reader to the chassis.
3. Lift and remove the SD card reader from the system board.
Installing the media card reader
Prerequisites
About this task
The following images indicate the location of the media card reader and provide a visual representation of the installation
procedure.
Before working inside your
bracket.
computer.
Disassembly and reassembly
41