Configuration; 3.1 View Modules - ABB Arc Guard System TVOC-2 Installation And Maintenance Manual

Human Machine Interface, functions
2.3 Error Log

3 Configuration

3.1 View Modules

68
In the Error Log are the nine latest system error events stored, the oldest will
be overwritten.
Note!
See chapter Troubleshooting"Error Log" on page - 56 for more information
about system errors.
Configuration consists of three subcategories as follows:
3.1 View Modules.
3.2 View DIP switches.
3.3 Revision Information.
View Modules displays which modules are connected to the Arc Monitor. To
see the View Modules do the following steps:
1 From Start window, press Menu.
2 Select 3. Configuration, press OK.
3 Select 3.1 View Modules, press OK.
This figure shows the window, 3.1 View Modules, with the modules con-
nected to the Arc Monitor.
3.1 View Modules
X3
HMI-int.
HMI-ext. CSU 21
X2 CSU 22
Back