User Settings - Lenovo RT5.0kVA Installation And User Manual

Main menu Submenu
Measurements
Control Go to Bypass
Start battery test
Reset fault state
Restore factory settings
Reset average power
Reset cumul. power
Dry contacts test
Settings Local settings
In/Out settings
On/Off settings
Battery settings
Event log Event filter
Event list
Reset event list
Fault log Fault list
Identification
Register product

User settings

The following table displays the options that can be changed by the user.
Local settings
10
3U Rack or Tower UPS RT5.0kVA and RT6.0kVA Installation and User's Guide
Submenu
Language
Date/time
LCD
Audible alarm
Display information or Menu function
[Load] W VA A pf / [Input/Bypass] V Hz /
[Output/Efficiency] V Hz / [Battery] % min V n° / [DCbus]
V / [Average power usage] Wh / [Cumulat. power
usage] Wh since date
Transfers the UPS on Bypass mode
Starts a manual battery test
Clears active fault
Returns all settings to original values
Clears power usage measurements
Clears cumulated power usage measurement
Tests dry contact relay outputs
Sets product general parameters
Sets output parameters
Sets On/Off conditions
Sets battery configuration
Selects faults, alarms and/or events to display
Displays the events stored
Clears events
Displays event log or alarms
[Product type/model] / [Part/Serial number] / [UPS/NMC
firmware] / [Com card IPv4], [Com card IPv6], [Com
card MAC] / [Detected accessories]
Links to Lenovo registration website
Available settings
[language_name]
Select the desired language
from the list. Menus, status,
notices and alarms, UPS
fault, Event Log data and
settings are in all supported
languages.
Format:
[International] [US]
Modify LCD screen
brightness and contrast
to be adapted to room light
conditions.
[Enabled] [Disabled on
battery] [Always disabled]
Default settings
[English]
User selectable when UPS
is powered for the first time.
[US]
[Enabled]