Chapter 3. Installation
Inspecting the equipment
If any equipment has been damaged during shipment, keep the shipping cartons and packing materials and
contact your place of purchase.
Note: Check the battery recharge date on the shipping carton label. If the date has passed and the battery
packs were never recharged, do not use the UPS. Contact your service representative.
Unpacking the unit
Important: Unpacking the unit in a low-temperature environment might cause condensation to occur in
and on the unit. Do not install the unit until the inside and outside of the unit are absolutely dry (hazard
of electric shock).
Step 1. Unpack the equipment and remove all packing materials and the shipping carton.
Note: Do not lift the UPS or EBM from the front panel.
Figure 4. Unpacking the UPS and Extended Battery Module
Step 2. Discard or recycle the packaging in a responsible manner, or store it for future use.
15
© Copyright Lenovo 2015, 2020