Chapter 3. Installation; Inspecting The Equipment; Unpacking The Unit - Lenovo RT8.0kVA Installation And User Manual

6u rack or tower ups rt8.0kva and rt11.0va

Hide thumbs Also See for RT8.0kVA:

Table of Contents

Chapter 3. Installation

If any equipment has been damaged during shipment, keep the shipping cartons and packing materials and

contact your place of purchase.

Note: Check the battery recharge date on the shipping carton label. If the date has passed and the battery

packs were never recharged, do not use the UPS. Contact your service representative.

Important: Unpacking the unit in a low-temperature environment might cause condensation to occur in

and on the unit. Do not install the unit until the inside and outside of the unit are absolutely dry (hazard

of electric shock).

Step 1.

Unpack the equipment and remove all packing materials and the shipping carton.

Note: Do not lift the UPS or EBM from the front panel.

Figure 8. Unpacking the UPS and Extended Battery Module

Step 2.

Discard or recycle the packaging in a responsible manner, or store it for future use.

Table of Contents

Rt11.0va