Table of Contents
Advertisement
Operation
status
Cause
High Efficiency
The UPS is operating in High
mode
Efficiency mode.
Bypass mode
An overload or a fault has occurred,
or a command has been received,
and the UPS is in Bypass mode.
Display functions
Press the Enter (
) button to activate the menu options. Use the two middle buttons (
through the menu structure. Press the Enter (
return to the previous menu.
Main menu
Submenu
Measurements
Control
Go to Bypass
Start battery test
Reset fault state
Restore factory settings
Reset average power
Reset cumul. power
Dry contacts test
Local settings
Settings
In/Out settings
On/Off settings
Battery settings
Event log
Event filter
Event list
Reset event list
Fault log
Fault list
Reset fault list
Description
The UPS is powering and protecting
the equipment.Get description from
Gordon Wright
Equipment is powered directly from
AC input and is not protected by the
UPS.
) button to select an option. Press the
Function
[Load] W VA A pf / [Input/Bypass] V Hz /
[Output/Efficiency] V Hz %/ [Battery] % min V n° /
[DCbus] V / [Average power usage] Wh / [Cumulat.
power usage] Wh since date
Transfers the UPS on Bypass mode
Starts a manual battery test
Clears active fault
Returns all settings to factory values
Clears average power usage measurement
Clears accumulated power usage measurement
Tests dry contact relay outputs
Sets product general parameters
Sets Output parameters
Sets On/Off conditions
Sets battery configuration
Selects faults, alarms and/or events to display
Displays the stored events
Clears all stored events
Displays the stored faults
Clears all stored faults
Is Battery Being
Charged?
Yes
Yes
and
) to scroll
button to cancel or
9
.
Chapter 2
Presentation
Advertisement
Table of Contents
