Step 10. Remove the Input Bypass AC jumper
.
Step 11. Punch the Bypass AC Source knockout of the MBP I/O cover
and insert a provided cable
gland inside.
Step 12. Insert the Normal AC source cable through the cable gland.
Step 13. Connect the wires to the Normal AC source (Input) terminal blocks.
Step 14. Insert the Bypass AC source cable through the cable gland.
Step 15. Connect the wires to the Bypass AC source (Input BP) terminal blocks.
Step 16. Insert the Output cable through the cable gland.
Step 17. Connect the wires to the Output terminal blocks.
Step 18. Tighten the cable glands.
Step 19. Slide back and secure the MBP I/O cover
with the 5 screws.
36
6U Rack or Tower UPS RT8.0kVA and RT11.0VA and Maintenance Bypass Installation and User's Guide