Step 4.
Pull out the plastic handle of the left and right battery packs, and slide the packs out slowly on
to a flat and stable surface. Use two hands to support the battery packs. Set them aside for
reinstalling after that the EBM is rack mounted.
Step 5.
Mount the EBM in the rack.
Step 6.
Put back the battery packs, screw back the metal protection cover and the front panel, then
clip the center cover.
Rack mounting of UPS, EBM, and accessory modules
Step 1.
Follow steps 1 to 4 in "Preparing the EBM for rack mounting" on page 22 for module mounting
on the rails.
The rails and necessary hardware are supplied by IBM (optional).
23
.
Chapter 3
Installation