Table of Contents
Advertisement
Step 3.
Insert a power cable (refer to Table 2 "Recommended cable cross-sections" on page 26 for cable
cross-section) through the cable gland of the MBP Bypass Input cover
provided in the packaging).
Step 4.
Connect the wires to the Input BP terminal blocks of the MBP Bypass Input cover
Step 5.
Tighten the cable gland.
Step 6.
Slide back and secure the MBP Bypass Input cover
Step 7.
Connect the two integrated power cables
cable to the UPS I/O terminal blocks, following color coding on the cables and the UPS I/O cover:
blue for UPS Input; red for UPS Output; yellow for UPS Input Bypass. Remove the Input Bypass
AC jumper on UPS.
Step 8.
Connect the MBP detection cable
Step 9.
Slide the MBP I/O cover after removing the 5 screws, to access to MBP terminal blocks.
with the 3 screws.
and the previously installed Bypass Input power
to the specific UPS connector.
. (The cable is not
.
.
Chapter 4
Power cables connection
35
Advertisement
Table of Contents
