Battery settings
Submenu
Bypass standby
Automatic battery test
Low battery warning
Restart battery level
Battery charge mode
External battery
Deep discharge protection
Available settings
[Enabled] [Disabled]
Define if output is powered
from Bypass in Standby
mode.
In constant charge mode:
[No test] [Every day] [Every
week] [Every month]
In ABM cycling mode:
[No test] [Every ABM cycle]
[0%] ... [100%]
The alarm triggers when
the set percentage of
battery-pack capacity is
reached during back-up
time.
[0%] ... [100%]
If set, automatic restart
will occur only when
percentage of battery
charge is reached.
[ABM cycling] [Constant
charge]
[Auto detection]
[Manual EBM set.]
[Manual battery set.]
[No battery]
[Yes] [No]
If set to Yes, the UPS
automatically prevents
batteries from deep
discharge by adapting end
of back-up time voltage
threshold. Warranty void if
set to No.
Default settings
[Disabled]
[Every ABM cycle]
[20%]
[0%]
[ABM cycling]
[Auto detection]
Using standard EBM, UPS
detects automatically the
number of EBM connected
[Yes]
13
.
Chapter 2
Presentation