Clearing And Acknowledging; Using The Local Hmi Help - Hitachi 650 Series Operation Manual

1MRK500128-UEN Rev. H
5.1.15

Clearing and acknowledging

The Clear button is used to reset, acknowledge or clear all messages and indications, including
LEDs and latched outputs as well as registers and recordings. Press the Clear button to activate a
selection menu, and select the wanted clearance or reset function. Events and alarms assigned to
alarm LEDs are cleared with the Clear button as well.
1.
Press
GUID-0CFAED62-312B-449F-BB58-D49496EA1CC8 V2 EN-US
Figure 31:
The content of the Clear menu depends on the configuration configured with PCM600.
2.
Select the item to be cleared with
3.
Press
4. Repeat steps 2 and 3 to clear other items.
5.1.16

Using the local HMI help

1.
Press
2.
Scroll the text with
3.
To close the help, press
The help dialog is also closed when the display timeout expires.
650 series
Operation manual
After changing the parameters marked with !, the IED restarts automatically for the
changes to take effect.
to activate the Clear view.
Clear view
, select OK to confirm the selection or Cancel to cancel the selection, and press
to open the help view.
or if the help text exceeds the display area.
.
© 2017 - 2023 Hitachi Energy. All rights reserved
IEC13000236-1-en.vsd
or .
Section 5
Using the HMI
AMU0600425 v10
.
AMU0600421 v8
45