Operating Procedures; Monitoring; Indications; Using Auto-Indication Messages - Hitachi 650 Series Operation Manual

1MRK500128-UEN Rev. H
Section 7
7.1

Monitoring

7.1.1

Indications

The operation of the IED can be monitored via three different indications on the LHMI.
• Three indicator LEDs with fixed functionality: Ready, Start and Trip
• 15 programmable three-color alarm LEDs which can present 45 virtual LED states
•
• An auto-indicating message on the display.
7.1.1.1

Using auto-indication messages

Auto-indication messages are shown in a dialog box that is displayed when the disturbance recorder
is triggered. The indication dialog box shows a list of current disturbance recordings one by one. To
scroll the dialog, use
1. Read the auto-indication message in the dialog box.
The message contains the same information that is available for disturbance recordings.
2.
Press
3.
Press
Clear view and to clear messages.
GUID-42E5B0A0-789D-4B6F-9615-5B14AD8C1653 V1 EN-US
Figure 33:
650 series
Operation manual

Operating procedures

For each on state LED color and for the LED off state, texts can be programmed with
PCM600 and via LHMI. These texts are displayed on the LHMI.
and .
To activate the auto-indication message function, the disturbance recorder function has to
be activated and properly configured. Check also that the setting Main menu /
Configuration /HMI /Screen /SCREEN:1 /AutoIndicationDRP is set to On.
to see more detailed information.
to close the auto-indication message without clearing it or press
Auto-indication message
© 2017 - 2023 Hitachi Energy. All rights reserved
IEC13000237-1-en.vsd
Section 7
Operating procedures
GUID-E3CC6AB4-D6C4-4504-A0F2-CA76EA3D7FCD v10
AMU0600430 v9
to activate the
51