Table of Contents
Advertisement
Basic Transmission Settings
General Description
You can temporarily change the Transmission Settings either before or after you place the document on the
ADF.
The Transmission Settings are as follows,
• Contrast
• Resolution
• Verification Stamp
After your document(s) have been sent, your machine will automatically return to the preset settings.
Contrast
Adjusting the contrast of scanned image data by pressing cursor keys
Resolution
Adjust the resolution to send documents by pressing resolution key.
123
NOTE
1. To change the preset contrast position, change the setting of Fax Parameter No.1 (CONTRAST (HOME)). (See page
153)
2. To change the preset resolution position, change the setting of Fax Parameter No.2 (RESOLUTION (HOME)). (See page
153)
3. When transmitting documents at S-Fine or 600 dpi Resolution, there is a possibility that printing quality may deteriorate
at the receiving station due to its reception capability. If this occurs, resend by Direct Transmission or transmit documents
at Fine Resolution.
10
Lighter
STANDARD
for standard originals
FINE
for detailed originals
S-FINE
for finer detailed originals
600 dpi
for 600 dpi detailed originals
HALFTONE (FINE)
for photo originals with Fine Resolution
HALFTONE (S-FINE)
for photo originals with S-Fine Resolution
HALFTONE (600 dpi)
for photo originals with 600 dpi Resolution
Normal
CONTRAST
- [
] +
Advertisement
Table of Contents
