Advanced Facsimile Feature
Timer Controlled Communications
The time must be pre-programmed in advance to send document(s) to a single or multiple destinations at a
deferred time within the next 24 hours.(See Note 2)
The document is scanned and stored in memory as a reserved document until the pre-programmed time
comes. The transmission starts at the pre-programmed time.
Programmed to transmit at 21:00
Deferred Transmission
123
1
2
3
Enter the Start Time using the Number Pad (up to 4 digits), then
4
press
NOTE
1. If you enter a wrong number, press
2. To change or cancel the Deferred Communication settings, refer to Changing the Start Time or the Station of a File. (See
page 61)
3. The Program Keys for Deferred Transmission are useful if you frequently need to send documents to the same destina-
tion at a specified time. Refer to To Set a Program Key for Deferred Transmission. (See page 147)
Continued on the next page...
Set document(s) face up.
.
then reenter the correct number.
Transmitted
FUNCTION
(1-9)
ENTER NO. OR
DEFERRED XMT
START TIME
:
ENTER STATION(S)
THEN PRESS START
33