Table of Contents
Advertisement
Printing Journals and Lists
(1)
Printout Date
(2)
Printout Time
(3)
Journal Number
(4)
Communication Result
(5)
Number of Pages
Transmitted or Received
(6)
File Number
(7)
Duration of Communication
(8)
Type of Communication
(9)
Remote Station
Identification
(10)
Communication Date
(11)
Communication Start Time
(12)
Diagnostic
(13)
Own LOGO
(14)
Own ID Number
(15)
Own Character ID
1
NOTE
1. For more details, refer to the Problem Solving in the Operating Instructions (For Basic Operations) of provided booklet.
176
: MMM-dd-yyyy, represents the month-day-year.
: "OK" indicates that the communication was successful.
"M-OK" indicates that the memory reception was successful.
"BUSY" indicates that the communication has failed because of busy line.
"STOP" indicates that
"P-OK" indicates that memory overflow or document misfeeding occurred
while storing the documents into memory for transmission, but the
successfully stored document(s) was sent.
"R-OK" indicates that the Relayed XMT was successful.
"B-OK" indicates that the Batch Transmission was successful.
"- -" indicates LAN transmission.
"JUNK" indicates that an incoming document was rejected by the Junk
Fax Filter function.
"3 digits Info Code" (See Note 1) indicates that the communication has
failed.
: The 3 digits number is the number of pages successfully transmitted or
received.
When the documents are stored into memory, two 3 digits numbers will
appear.
The first 3 digits number represents the number of pages successfully
transmitted. The second 3 digits number represents the total number of
pages that were attempted to be transmitted.
Asterisk "*" indicates that the quality of some received copies may be poor.
: 001 to 999 (If the document is stored into memory, a file number is assigned
for each communication.)
: "XMT" means Transmission
"RCV" means Reception
"POL" means Polling
"PLD" means Polled
"FWD" means Fax Forward
"RMT" means Remote Diagnostic
: Name: Recorded name in One-Touch or ABBR. Numbers or remote station's
Character ID.
number: Dialed Telephone Number.
Number: Remote station's ID number.
Telephone Line (Line-2) was used for the communication.
Email address
: For service personnel only
: Up to 25 characters
: Up to 20 digits
: Up to 16 characters
was pressed during communication.
indicates that the Second
Advertisement
Table of Contents
