Table of Contents
Advertisement
Relayed Transmission
Function Parameter for Relay Station
Program the following parameters to use this machine as a relay station in Function Parameters
Item
1
2
3
4
5
110
Required Function
Parameters
Fax Parameter No.142
(RELAY XMT)
Fax Parameter No.143
(RELAY XMT REPORT)
User Parameter
(RELAY XMT PASSWORD)
User Parameter
(RELAY DOMAIN (01)~
(10))
User Parameter
(MANAGER'S EMAIL
ADDR)
Selecting whether the machine will accept and perform G3 Relayed
Transmission.
• Invalid
Machine will not accept a Relay XMT request.
• Valid
Machine will accept a Relay XMT request.
Selecting how the COMM. Journal for Relayed Transmission is sent
to the originator.
• Off
Does not send.
• Always
The COMM. Journal is always sent after a Relay communication is
completed or has failed.
• Inc. Only
The COMM. Journal is sent if the Relay communication to the
destination has failed.
Enter a Relay XMT Password (up to 10 characters) to be used for
the protection against unauthorized (outside) stations from
accessing your machine to relay messages to a G3 fax machine via
PSTN. This password should be given out to authorized people
only.
Note: User Parameter (RELAY XMT PASSWORD) to enable
this machine to work as a relay station.
As the relay password is transmitted in the Email header, it should
be differentiated from the Email Address used by Email or Internet
Fax. A relay password pre-programmed in this way would be easy
to identify when Internet Fax is received
Register up to 10 Domain Names (up to 30 characters) that your
machine will accept Relayed Transmission.
Requests to relay a message to another G3 fax machine via PSTN.
Ex: Registered Domain Names:
• toshiba.co.jp
• abc.iFax.com
• toshiba.com
Note: To increase network security and prevent third party
access to the relay station, enter a relay-permitted
domain name and an administrator Email Address for
every relay station.
Note: If the whole domain name is left blank, Internet Fax
will receive Relayed transmission requests from all the
domain names.
Register the department manager's Email Address for supervision,
and cost control purposes. Once registered, the machine will send
Email notification to the Email Address for each Relayed XMT
Request received from a remote station. The following information
is sent.
• From
The Email Address of the originating station.
• To
The Telephone Number of the destination G3 fax machine.
Explanation
Advertisement
Table of Contents
