Relay Transmission; Relay Transmission, Relay-Relay Transmission Overview - Toshiba e-STUDIO170F Owner's Manual

Toshiba e-studio170f multifunction fax owner's manual
Hide thumbs Also See for e-STUDIO170F:
Table of Contents

Advertisement

- RELAY TRANSMISSION

Relay Transmission, Relay-Relay Transmission Overview

What is a "Relay Transmission"?
A relay transmission is used to send documents from your facsimile (origina-
tor) to a Hub Station, which then sends them to additional end stations. If you
have several stations in one or more regional areas (e.g. Los Angeles Metro,
New York City, Dallas-Ft. Worth, Seattle-Tacoma, etc.); you can save time
and phone charges by setting up a relay system. By sending your document
to a Hub Station, you can then instruct the Hub Station to retransmit the docu-
ment to the end stations in their local geographical area.
Originator
Hub
Station
Station
What is a "Relay-Relay Transmission"?
A Relay Transmission where two levels of Hub Stations are involved is called
a Relay-Relay Transmission. In a Relay-Relay Transmission, the first Hub
Station sends the document to another Hub Station(s) which then transmits
them to additional end stations.
Originator
Hub
Station
Station
End Station Group
stations to finally receive
the document)
End Station
End Station Group
stations to finally receive
the document)
Second Hub
Station
End Station
End Station
Second Hub
Station
End Station
To perform Relay Transmissions or Relay-Relay Transmissions, you must build a
network beforehand.
Consult your authorized TOSHIBA dealer for assistance in using this function.
Conditions for a Relay/Relay-Relay Transmission Network
1. The originator station must be an ITU-T relay communication compatible fac-
simile unit such as TOSHIBA DP120F/e-STUDIO170F.
2. The Hub Station must be an ITU-T relay communication compatible facsimile
unit with Hub Station functions such as DP120F.
NOTE:
The e-STUDIO170F can only function as an originator station.
3. The Relay Hub Station must have the end station settings pre-programmed
as a Relay Box.
4. Due to advanced planning and setup requirements for the Relay-Relay trans-
missions involving two or more Hub Station transfers, contact your autho-
rized TOSHIBA dealer for detailed instructions.
111

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-studio 170f

Table of Contents