Toshiba e-STUDIO170F Owner's Manual page 53

Power Saver Operation - continued
4
5
Enter the Start Time
Period
Enter the time period (in mi- Enable or Disable the Printer
nutes) for standby operation Power Saver function.
prior to entering the Super En-
ergy Saver mode.
(to set Printer Power Saver ON)
(to set Printer Power Saver OFF)
If "ON" is selected, the cur-
rently set time period is dis-
played below. The time on the
left is the Printer Power Saver
start time (or time that the
ENTER TIME
(1-60) [ 3] printer unit will power down).
The time on the right is the
Printer Power Saver end time.
When the correct time period is
displayed, press:
(Example if the 24-hour format
option is selected in DATE &
COMPLETED
TIME setting)
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
Go to Step 7.
Select the Printer Power Saver Function
START/STOP TIME
[12:00AM-12:00AM]
(Example if the 12-hour format
option is selected in DATE &
TIME setting)
When "OFF" is selected, the
"COMPLETED" message is
displayed as shown at the bot-
tom in Step 6. Returns to SET-
UP menu screen.
START/STOP TIME
[00:00-00:00]
6 7
Enter the Start Time
and End Time
Move the cursor to the desired
After completing this Configura-
position, using the following tion Setting, press
keys.
or
to exit the Configuration Setting
mode and return to the Standby
Enter the time period.
Mode.
Change the AM/PM designa-
tion if selected by pressing the
following keys.
MENU
or
When the correct time period is
displayed, press:
COMPLETED
Displayed for 2 seconds
Returns to display the setup
menu screen.
Select Another
SETUP Item, or ...
STOP
5 1
5 1