Sending Recovery Transmission - Toshiba e-STUDIO170F Owner's Manual

Sending Recovery Transmission

This operation is used to re-
1
send a document after the doc-
ument initially failed to be sent.
If recovery transmission is set
to ON, the document is stored
Press:
in the e-STUDIO170F for re-
sending.
NOTES:
• When the Recovery Trans-
mission is set to OFF, an
error tone and "NOT AL-
LOWED NOW" LCD
prompt result when Recov-
ery Transmission is se-
lected.
If there is no document
stored for recovery trans-
mission, an error tone
sounds and "NO ENTRY"
LCD prompt will be dis-
played.
Press
• To change the default set-
view the jobs stored for resend-
ting of this function, refer
ing. The information is dis-
to page 145. The status
played on the LCD display.
selection in this operation
will take precedence over
the default setting.
To cancel the document, go to
Step 4.
172
Display the
2
RECOVERY
TRANSMIT Menu
When the sending document to
be recovered was sent using
MENU
the One Touch key, Abbrevi-
+ ated Dial Number, Group Num-
ber, or Alphabet Dialing, press:
+
You can also change the num-
+
ber of the remote facsimile if
dialed from the Dial Keypad.
To re-transmit the document or
+
change the facsimile number,
press
MENU
JOB NUMBER
or to
1.START
2.CHANGE
To start the transmission,
press:
RECOVERY TX
[ENTER]:START
The transmission starts imme-
diately if the phone line is
available.
FILE NBR = 005
To change the number, press:
12345
FAX NUMBER (MAX128)
[12345
3
Select the Desired Change the
Job Facsimile Number
Enter the new facsimile num-
ber.
If the correct number is en-
tered, press:
.
005
The transmission starts imme-
diately if the phone line is
available.
]
4
Cancel the
Document
Press:
JOB CANCEL
DELETE JOB NUMBER005
1.YES
2.NO