Toshiba e-STUDIO170F Owner's Manual page 34

Drum Unit Replacement - continued
Attach the new
4 5
Drum Unit to the
Toner Cartridge
Take the new Drum Unit from Install the Process Unit along
its shipping carton. the Guide in the machine.
Match the colored parts in the Make sure the Process Unit is
lower area of the new Drum inside the machine as far as it
Unit with the same colored will go.
parts in the lower area of the
NOTE:
Toner Cartridge.
CAUTION:
3 2
Install the Toner
6
Close the Front
Cartridge and New
Cover
Drum Unit
Press up the Front Cover until
it clicks to attach securely.
Pressing in the Process
Unit forcibly could damage
the machine.
Always hold the Process
Unit by the green handle.
7 8
Reset the Drum
Counter
Perform the following procedure Press:
to reset the Drum Unit counter
after you replace the Drum
Unit.
Press:
MENU
+
Press:
+
+
+
Return to display the SETUP
RESET DRUM COUNT
menu screen.
2.NO
NOTE:
1.YES
NOTE:
Keep in mind that the drum
warning does not disappear
unless this operation is per-
formed.
Reset the Drum
Counter - continued
RESET DRUM COUNT
ARE YOU SURE ?
COMPLETED
Displayed for 2 seconds
You must reset the drum
counter when you replace
the Drum Unit.
Never perform this operation
on any other occasion.