- TRANSMISSION OPTIONS
Security Transmission
This function prevents your
1
facsimile from sending to an
incorrectly dialed phone. With
this function set ON, the dialed
number will be checked against
Load the document face down
the remote facsimile's pro-
in the Document Support (see
grammed Transmit Terminal ID
page 83).
(TTI). The transmission will
only occur if the number dialed
Adjust the resolution and con-
matches the remote party's
trast if desired (see pages 84
number.
and 85).
You can turn the SECURITY
TX ON for a single transmis-
sion using this procedure.
NOTES:
• To change the default set-
ting of this function, refer
to page 143. The status
selection in this operation
will take precedence over
the default setting.
• The facsimile will auto-
matically return to its de-
fault status immediately
after that transmission is
complete.
162
2
Load the Document
Display the
SECURITY TX Menu
Press:
JAN-31 09:43 AM 100%
AUTO RECEIVE
SECURITY TX
2.OFF
1.ON
3
Select the Option
Turn ON Security Transmis-
sion by pressing:
MENU
+
+
Turn OFF Security Transmis-
sion by pressing:
+
+
The following screen is dis-
played. You may dial the re-
mote facsimile for your com-
munication job. The display will
return to the Standby Mode in
about 60 seconds if no keys
are pressed.
JAN-31 09:43 AM 100%
ENTER TEL NUMBER
4
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option
at this point.
•
One Touch Key Dialing
... See page 89
•
Abbreviated Dialing
... See page 90
•
Alphabet Dialing
... See page 91
•
Keypad Dialing
... See page 92