Line Monitor - Toshiba e-STUDIO170F Owner's Manual

Line Monitor

This function is used to set the
1
facsimile's speaker ON in order
to monitor the phone line for
one communication only. This
function is mainly used to con-
Load the document face down
firm dialing and phone line sta-
in the Document Support (see
tus.
page 82).
You can activate this option
Adjust the resolution and con-
when programming an Abbrevi-
trast if desired (see pages 83
ated Dial Number (page 65) or
and 84).
One Touch Dial Key (page 71)
if communication with a certain
remote party always requires
this option.
NOTE:
To change the default set-
ting of this function, refer to
page 57. The status selec-
tion in this operation will
take precedence over the
default setting.
2
Load the Document
Press:
JAN-31 09:43 AM 100%
AUTO RECEIVE
LINE MONITOR
2.OFF
1.ON
3
Display the LINE Select the Option
MONITOR Menu
Turn ON the monitor speaker
MENU by pressing:
+
+ Turn OFF the monitor speaker
by pressing:
JAN-31 09:43 AM 100%
ENTER TEL NUMBER
4
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option
at this point.
• One Touch Key Dialing
... See page 89
• Abbreviated Dialing
... See page 90
• Alphabet Dialing
... See page 91
• Keypad Dialing
... See page 92
175