Recording Paper Installation (Optional Recording Paper Tray) - Toshiba e-STUDIO170F Owner's Manual

Recording Paper Installation (Optional Recording Paper Tray)

Remove the Optional
1 2
Recording Paper
Tray
Remove the Optional Record- Remove the Optional Tray
ing Paper Tray. Cover.
2 4
3
Remove the Press Down the
Optional Tray Cover Paper Pressure Plate
Press the Paper Pressure Plate
down until it clicks.
4 5
Prepare Recording
Paper Sheets
Prepare new recording paper Place the recording paper
sheets by holding both ends stack into the tray.
and flexing several times.
NOTES:
This will separate the sheets •
and provide optimum feeding.
Align the stack so that all four
•
corners are neatly aligned.
Be sure to load the recording
paper in accordance with any
paper manufacturer's printing
•
side instruction. Some papers
have a preferred image side.
This image side should be
•
placed face up in the Recording
Paper Tray.
Install the Recording
Paper
Do not exceed the upper
stack limit line as this may
cause paper misfeeds.
Make sure that the paper is
seated under the two sepa-
ration claws on the back
side of tray.
Be careful not to damage
the claws of the Recording
Paper Tray.
Do not add paper on top of
the paper already in the ma-
chine.