Transmission Options; Delayed Communication (Time Designation) - Toshiba DP125F Operator's Manual

- TRANSMISSION OPTIONS

Delayed Communication (Time Designation)

This function is available to re-
1
serve a document for transmis-
sion at a programmed time.
This function is convenient for
- TRANSMISSION OPTIONS
Load the document face down
making use of non-peak dis-
in the Document Tray (see page
count telephone rates for do-
88).
mestic and overseas facsimile
transmissions. Delayed commu-
Adjust the resolution and con-
nication can be applied to
trast if desired (see page 89).
Single Transmissions (to trans-
mit a single document to a
specified destination), Multi-ad-
dress (Group) Transmissions,
Mailbox Transmissions, Relay
Transmissions, and Polling
Communication.
You can activate this option
while programming an Abbrevi-
ated Dial Number (page 70) or
One Touch Dial key setting
(page 77) if communication with
the remote party always re-
quires this option. Otherwise,
use the following procedure.
Display the
2
Load the Document
DELAYED COMM.
Menu
Turn the Flip Panel to the "50-
73" view to select the desired
Function Key.
Press:
MAY-17-00 WED11:13 DELAYED COMM.
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
NOTE:
It is not necessary to input a
day-of-month, if you wish the
communication to be com-
pleted within the next 24-
hour period.
Simply leave the day-of-
month area blank.
3
Enter the Time and
Date
Enter the time and day-of-
month to start the communica-
tion.
TIME =HH:MM DD
(The cursor moves to the next
right digit as a numeric value is
entered on each digit. Use the
[ ] key to backspace and de-
lete the values on the digits al-
ready entered.)
Press:
COMM. RESERVATION
RESIDUAL MEMORY 100%
ENTER TEL NUMBER
4
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods.
• One Touch Key Dialing
... See page 97
• Abbreviated Dialing
... See page 98
• Alphabet Dialing
... See page 99
• Keypad Dialing
... See page 100
NOTE:
• If the day-of-month value
entered in Step 2 does
not exist in the current
month, the communica-
tion will start on the first
day of the next month.
For example, if "30" is
entered in February, the
communication will start
on March 1st.
181