Relay Station Transmission Report Setting - Toshiba DP125F Operator's Manual

Relay Station Transmission Report Setting

1 2
Display the RELAY
STN. REPORT Menu
Press: Select the option to print a re-
port when the DP120F/DP125F
is used as a relay hub station.
This report is printed by the hub
+
unit after a relay transmission to
end terminals.
To ALWAYS print a report,
+
press:
+
To only print a report when an
error has occurred, press:
+
+
To turn OFF automatic printing
of reports, press:
+
Go to Step 12.
SET RELAY STN. REPT.
1.ALWAYS
2.ON ERROR
3.OFF
202
3
Set the Option for
Relay Hub Station
To print a first page image of the
document, press:
To not print a first page image of
the document, press:
The following screen is dis-
played to confirm your selection.
OPERATION COMPLETED
After completing the Relay Sta-
tion Transmission Report Set-
ting, you may continue to select
other Report settings referring to
their associated pages for in-
struction, or press
PRINT 1ST PG IMAGE?
1.ON
2.OFF
to exit the Report Setting mode
and return to the Standby Mode.
Set the Option for
First Page Image