Table of Contents
Advertisement
- TRANSMIT CONFIGURATION
Document Specifications
The following table shows the specifications for original documents that can be used
with the facsimile.
Single Sheet
Max.
Document
Size
Min.
Effective Scanning
Width
Max. Capacity of
Document Tray
Thickness of
0.05 to 0.15 mm
Document
[0.002 to 0.0059 in.]
Type of Paper
NOTES:
•
Operator assistance may be required for pages longer than 420mm (16.5
inches).
•
For multiple sheets, the documents must be the same size and paper type.
•
A small border region of each document is not imaged when each document is
scanned. The effective scanning area is as shown in the figure below.
216 mm (8.5 inches)
Effective
Letter/Legal Size
Scanning
214 mm (8.4 inches)
Multiple Sheets
216mm(W) x 1000mm(L)
[8.5 in.(W) x 39.37 in.(L)]
148mm(W) x 100mm(L)
[5.83 in.(W) x 3.94 in.(L)]
214mm
[8.4 in.]
Up to 20 sheets (Legal Size)
Up to 50 sheets (Letter Size)
0.06 to 0.12 mm
[0.0025 to 0.0047 in.]
Uncoated on both sides
Max. 4 mm (0.16 inches)
Area
Max. 2.5 mm (0.1 inches)
Caution:
If the documents are any of the following, they should be copied to plain paper
before transmitting.
•
Torn, wrinkled, or damp pages
•
Folded pages or pages with holes
•
Transparent pages or pages with a smooth, shiny finish
•
Cloth or metal sheets
When using originals with the following specifications, use a carrier sheet to avoid
document jams or misfeeds. When using carrier sheets, only one sheet can be
sent at a time.
•
Smaller than minimum size.
•
With thickness less than 0.05 mm.
To use a carrier sheet, lift the clear cover, place a single document sheet face-up
on the paper sheet. Purchase carrier sheets from your TOSHIBA facsimile dealer
or use a transparency with a paper backing attached at the lead edge.
87
Advertisement
Chapters
Table of Contents
