Toshiba DP125F Operator's Manual page 240

When the Recorded Image is not Clear... - continued
Recording Unit Cleaning Procedure - continued
6 7
Clean the Front
Contacts
085
Clean the silver contacts found Using a cotton swab, clean the
along the front of the developer silver contacts found along the
chassis, using a cotton swab. right side of the developer chas-
sis.
238
8
Clean the Right
Contacts
087
086
Using a cotton swab, clean the
silver contacts found in the rear
of the developer chassis.
9
Clean the Rear Separate the Drum
Contacts Unit
Drum Unit
052
Separate the Drum Unit from
the Developer Assembly.
10
Clean the Charger
Wire
Charger Cleaner
Developer
Drum Unit
Assmbly
Clean the Charger Wire in the
Drum Unit with a
Cleaner.
Insert the Charger Cleaner per-
pendicularly until it contacts
the case. Then, move
Charger Cleaner in one direc-
tion horizontally slowly.
WARNING:
Moving the Charger Cleaner
quickly or at an incorrect
angle may damage or break
the Charger Wire.
089
Charger
the