Toshiba DP125F Operator's Manual page 132

Setting Up a Relay Box - continued
8
Enter the End Station - continued
Enter the Group
8c 8d
Number of End Station
- continued
Then press: If the End Station (One Touch
Key, Abbreviated Dial Number
or Groups Number) designated
in Step 8a, 8b or 8c have al-
ready been entered under the
RELAY END NUMBER
same Relay Box, the following
LCD prompt is displayed.
GROUP NUMBER= XXXX
XXXXXXXX
After 2 seconds:
RELAY END NUMBER
GROUP NUMBER= XXXX
To cancel the existing End Sta-
ENTER MORE OR
tion (One Touch Key, Abbrevi-
PRESS [START]
ated Dial Number or Group
Number), press:
Go to Step 8.
To retain the existing End Sta-
tion (One Touch Key, Abbrevi-
ated Dial Number or Group
Number), press:
Go to Step 8.
130
9
When all the desired End Sta-
Cancel or Retain the
tion Entries (One Touch Keys,
Existing Station
Abbreviated Dial Numbers or
Group Numbers) are completed
under the same Relay Box,
press:
TRANSMISSION REPORT
ENTER TEL NUMBER,
SPEED DIAL KEY OR OT
ENTER TO COMPLETE
RELAY END NUMBER
ALREADY ASSIGNED
1.CANCEL
2.RETAIN
10
Complete the End Enter the Number to send the Transmission
Station Entry Result
Enter the facsimile number you
want the relay transmission re-
port (relay transmission End
Stations results) sent to.
If you do not desire a relay
transmission
The following screen is dis-
played for about 2 seconds to
indicate that the Mailbox is reg-
istered.
REGISTERED
10a
Enter the Number
Using the Dial Keypad
Enter the facsimile number us-
ing the Dial Keypad.
report, press
.
TRANSMISSION REPORT
TEL NUMBER =(MAX128)
XXXX
Then press:
The following screen is dis-
played for about 2 seconds to
indicate that the Mailbox is reg-
istered.
REGISTERED