Led Test - Toshiba DP125F Operator's Manual

LED TEST

The LED test checks LED op-
1
eration by lighting all the
LEDs on the Operation Panel.
Press:
2
Select the LED TEST Check the LCDs
Menu
Visually
LEDs are on. After checking,
+
press
+
LED TEST
ENTER TEST RESULT
1.OK
+
2.NG
+
LED TEST
CHECK IF ALL LEDS
ARE TURNED ON
STOP TO COMPLETE
3
Select the Test Result
Option
check that all the If all the LEDs are turn on,
press:
.
If even one LED is not lit,
press:
4
Completed the
LED TEST
The word "OPERATION COM-
PLETED" is displayed on the
screen and the unit returns to
the individual test selection
screen.
The result of the LED test can
be confirmed with the self test
report. To print the self test re-
port, refer to "PRINTING A
TEST RESULT" on page 252.
If the result of the LED test is
judged to be NG, call your ser-
vice representative.
245