Toshiba DP125F Operator's Manual page 31

Toner Cartridge Replacement - continued
5 6
Prepare a New
Toner Cartridge
New Toner
Cartridge
054
055
Remove the new Toner Car- Align the four hooks on the new
tridge from its plastic bag and Toner Cartridge with the slots
save the bag for the used Toner on the Developer Assembly.
Cartridge. Slide the cartridge onto the as-
sembly.
Mix the new toner by shaking
the Toner Cartridge back and
Move the cartridge to the right
forth. until the button on the left of the
Developer Assembly clicks into
place.
NOTE:
Only use the specified
TOSHIBA Toner Cartridge.
7
Install the New Remove the Strip
Toner Cartridge
New Toner
Developer
Cartridge
Assembly
Developer
Assembly
Holding the Developer Assem-
bly with one hand, grasp the
end of the protective strip under
the toner housing. Pull the Strip
firmly to completely remove it
from the cartridge.
NOTES:
•
•
Attach the Drum Unit
8
to the Developer
Assembly
Drum Unit
Strip
041 042
Attach the Drum Unit to the De-
veloper Assembly. Position the
Drum Unit with the green drum
surface facing the black toner
roller on the Developer Assem-
bly.
Do not stand or turn the
Developer Assembly up
side down to avoid toner
leaking out the cartridge
after removing the strip.
Toner might stick to the
strip. Avoid toner sticking
to your clothes, furniture,
or other items since the
toner cannot be removed
easily. Toner is not harm-
ful to the human body. If
any toner sticks to your
clothes, wash away the
toner immediately using
cold water.
Install the Developer
9
Assembly with Drum
Unit
Developer
Assembly
Developer
Assembly
Holding the Developer Assem-
bly by the green handles, align
the three shafts on the Devel-
oper Assembly sides with the
slots in the machine frame.
043
29