Memory Transmission Report Setting
Display the
1
2
MEMORY-TX
REPORT Menu
Press:
Select the desired printing option
for single location memory trans-
missions.
+
To ALWAYS print a Transmis-
sion Report whenever a docu-
ment is transmitted, press:
+
+
To only print a Transmission Re-
port when an error has occurred,
press:
+
To turn OFF automatic printing of
+
Transmission Reports, press:
+
SET MEMORY-TX REPORT
1.ALWAYS
2.ON ERROR
3.OFF
198
3
Select the Option for
Memory TX
To print a first page image of the
facsimile
Transmission Report, press:
To not print a first page image of
the facsimile document on the
Transmission Report, press:
A5 SIZE PRINT
1.ON
2.OFF
PRINT 1ST PG IMAGE?
1.ON
2.OFF
4
Set the Option for
Select the Option for A5 SIZE PRINT
First Page Image
To reduce the report size and
document
on
the
print on A5 size paper, press:
To print the report normally,
press:
NOTES:
•
•
The following screen is dis-
played to confirm your selection.
OPERATION COMPLETED
After completing the Memory
Transmission Report Setting,
you may continue to select
other Report settings referring
to their associated pages for in-
struction, or press
to exit the Report Setting mode
To print the report on the
and return to the Standby
A5 size paper, the A5
Mode.
size paper must be load-
ed to the Bypass Tray
(option for DP120F) in
portrait, and the record-
ing paper size must also
be set to "OTHERS."
If no paper is loaded in
the Bypass Tray, the re-
port will be printed from
another tray.