Relay Destination Report Setting - Toshiba DP125F Operator's Manual

Relay Destination Report Setting

1 2
Display the RELAY
DEST. REPORT Menu
Press: Select the desired option to
send a Relay result report to the
Originator terminal when this
DP120F/DP125F is the hub unit
+
used in a relay transmission.
This is only applicable if the
DP120F/DP125F is used as a
Hub unit for the relay transmis-
+
sion.
To ALWAYS send a report to
the Originator, press:
+
+
To only send a report when an
error has occurred, press:
+
To turn OFF Automatic sending
+
of report, press:
SET RELAY END REPORT
1.ALWAYS
2.ON ERROR
3.OFF
3
Select the Option Set the Option for
for End Terminal First Page Image
To send a first page image of
the facsimile document, press:
To not send a first page image
of the
press:
The following screen is dis-
played to confirm your selection.
OPERATION COMPLETED
After completing the Relay Des-
tination Report Setting, you may
continue to select other Report
settings referring to their associ-
ated pages for instruction, or
press
PRINT 1ST PG IMAGE?
1.ON
2.OFF
to exit the Report Setting mode
and return to the Standby Mode.
facsimile document,
203