Rdc (Remote Diagnosis Configuration) Service - Toshiba DP120F Service Manual

1.6 RDC (Remote Diagnosis Configuration) Service

1.6.1 Remote Access
The Screen below is displayed to select options for Remote Access. Use the [ ↑ ] or [ ↓ ]
(1)
keys to select the desired option (ON, OFF), then press the [ENTER] key.
REMOTE ACCESS
1.ON
2.OFF
ON
Select to enable the Remote Access to ON.
OFF
Select to disable the Remote Access to OFF.
(2) After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
1.6.2 Download Firmware
The Screen below is displayed to select options for Download Firmware. Use the [ ↑ ] or
(1)
[ ↓ ] keys to select the desired option (ON JOB IN MEMORY, ANYTIME), then press the
[ENTER] key.
DOWNLOAD FIRMWARE
1.NO JOB IN MEMORY
2.ANYTIME
ON JOB IN MEMORY
Select to allow downloading the firmware only when there is no pending job in memory.
ANYTIME
Select to allow downloading the firmware any time, regardless of the no pending job in
memory.
(2) After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
March 2000 © TOSHIBA TEC
[MENU], [4], [5], [01]
[MENU], [4], [5], [02]
4-53 DP120F/DP125F Function Settings