Toshiba DP120F Service Manual page 546

2.6.14 Optional Feeder 2 Harness
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1) Remove the optional recording paper tray block. (Refer to "2.6.1 Optional Recording Pa-
per Tray Block.")
(2) Disconnect the connector from CN1 on the optional tray PBA.
(3) Remove the two screws from the optional feeder 2 harness, remove the optional feeder 2
harness.
CN1
(4) Reassemble the components in the reverse order of disassembly.
DP120F/DP125F Removal/Replacement
Optional tray PBA
Fig. 8-2-158
8-126
Optional feeder 2
harness
08-02-158
March 2000 © TOSHIBA TEC