Switching Letter(LTR) and Legal(LGL):
(1)
Remove the Paper tray from the machine and remove the paper.
(2)
Remove the Paper guide. Install the Paper guide in the correct position for the new paper
size.
NOTE: The paper size positions are indicated on the base of the Paper tray.
(3)
Remove the Paper size indicator sheet and re-insert it so that new paper size shows
through the window. (See page 3-14)
(4)
Press the paper pressure plate down until it clicks. (See page 3-15)
(5)
Install the paper and push the Paper tray all the way into the machine.
March 2000 © TOSHIBA TEC
Paper guide
Fig.3-5-2
3-23
3-5-02
DP120F/DP125F Installation