Toshiba DP120F Service Manual page 455

(8) Remove the two screws from the TX motor cover, and remove the TX motor cover.
(9) Disconnect the connector from the CN8 on the mother PBA.
(10) Remove the two screws from the TX motor.
(11) Slide the TX motor to the left, and remove the TX motor.
TX motor
Mother PBA
(12) Reassemble the components in the reverse order of disassembly.
NOTE: After reassembling, load a document and press the [COPY] key. Confirm
that copying and feeding normally operate.
March 2000 © TOSHIBA TEC
Fig. 8-2-46
Fig. 8-2-47
8-35
TX motor cover
Mother PBA
DP120F/DP125F Removal/Replacement
08-02-46
CN8
08-02-47