Toshiba DP120F Service Manual page 512

2.4.21 Paper Guide Unit
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1) Remove the main block. (Refer to "2.4.20 Main Block.")
(2) Release the cable from the four cord clamps.
(3) Stand the machine on its left side.
(4) Release the cable from the cord clamp.
(5) Release the four hooks of the paper guide unit, and remove the paper guide unit.
Hook
Paper guide
unit
(6) Reassemble the components in the reverse order of disassembly.
NOTE: After reassembling, perform the bypass tray paper size sensor test refer-
ring to the "Chapter 11: 1.5.4 SENSOR TEST" on page 11-20.
DP120F/DP125F Removal/Replacement
Cord clamp
Fig. 8-2-115
Hook
Fig. 8-2-116
8-92
Cord clamp
Cord clamp
Cable
March 2000 © TOSHIBA TEC
08-02-115
08-02-116