Toshiba DP120F Service Manual page 500

2.4.16 Printer Frame Front
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1) Remove the rear cover. (Refer to "2.1.5 Rear Cover.")
(2) Remove the front cover assembly. (Refer to "2.1.6 Front Cover.")
(3) Remove the right side cover. (Refer to "2.1.7 Right Side Cover.")
(4) Remove the inner cover. (Refer to "2.1.13 Inner Cover.")
(5) Remove the paper pickup solenoid. (Refer to "2.4.7 Paper Pickup Solenoid (Bypass Tray).")
(6) Remove the printer frame right assembly. (Refer to "2.4.8 Printer Frame Right Assembly.")
(7) Remove the front paper guide. (Refer to "2.4.10 Front Paper Guide.")
(8) Remove the pinch roller. (Refer to "2.4.11 Pinch Roller.")
(9) Remove the paper feed roller . (Refer to "2.4.12 Paper Feed Roller.")
(10) Remove the three screws from the printer frame front, and remove the printer frame front.
(11) Remove the spade connector from the drum earth plate.
Drum earth plate
DP120F/DP125F Removal/Replacement
Spade connector
Fig. 8-2-98
8-80
Printer frame front
08-02-98
March 2000 © TOSHIBA TEC