Toshiba DP120F Service Manual page 448

2.2.8 TX Drive Roller R and L Assembly
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1) Remove the CIS cover. (Refer to "2.1.3 CIS Cover.")
(2) Remove the one screw from the TX center shaft support, and remove the TX center shaft
support.
(3) While pulling the bushing on the rear of the TX drive roller R assembly to the front, lift the
TX drive roller R assembly to remove.
TX drive roller R assembly
TX center shaft support
DP120F/DP125F Removal/Replacement
Fig. 8-2-38
8-28
Bushing
08-02-38
March 2000 © TOSHIBA TEC