Copying Error - Toshiba DP120F Service Manual

Plain paper facsimile

Hide thumbs Also See for DP120F:

Table of Contents

4.6 Copying Error

Select the PRINT TEST in the test mode. (Refer to page 11-18.)

First perform a test print to check that there is no printing defect. If any, refer to "4.7 Poor Print

Is the document loaded with its face

Select SCANNER TEST in the test mode.

(Refer to page 11-24.)

Is the LED array of the CIS illuminated?

Is the cable firmly connected between the

CIS and the Mother PBA (CN7), between

the Mother PBA (CN24) and the Main PBA

Is the glass of the CIS clean and undam-

When no problem is found in the steps

above, the CIS or the PBA's may be de-

DP120F/DP125F Troubleshooting

Check points

Load the document correctly.

If illuminated, go to Step 4.

NOTE: The SCANNER TEST is not

terminated when the Scanner

cover is opened, but the CIS is

Insert the cable firmly to the connector.

Clean the CIS glass of all foreign material

or replace the CIS if damaged.

Replace in the order of: CIS, Main PBA

next and the Mother PBA.

Show Quick Links

Table of Contents