Toshiba DP120F Service Manual page 86

1.2.14 Document Mode
This is to set the resolution level and contrast for scanning documents.
Use the [ ↑ ] or [ ↓ ] keys to select the desired level of resolution (STANDARD, FINE, or
(1)
U-FINE), then press the [ENTER] key.
DOCUMENT MODE
1.STANDARD
2.FINE
3.U-FINE
STANDARD (8 pels/mm x 3.85 lines/mm)
For sending normal text and graphics.
FINE (8 pels/mm x 7.7 lines/mm)
For sending text of small characters and fine graphics.
U-FINE (16 pels/mm x 15.4 lines/mm)
With importance on resolution rather than the communication and process time, it is effec-
tive to send documents with fine small characters and graphics with fine lines.
Then the screen below appears. Use the [ ↑ ] or [ ↓ ] keys to select the desired contrast
(2)
level (NORMAL, DARKER, or LIGHTER), then press the [ENTER] key.
SET CONTRAST
1.NORMAL
2.DARKER
3.LIGHTER
NORMAL
For normal documents.
DARKER
For recording in a darker level (i.e., for documents with light or faint print, pencil).
LIGHTER
For recording in a lighter level (i.e., for documents with dark print).
(3) After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return to the Standby Mode screen.
DP120F/DP125F Function Settings
[MENU], [4], [1], [11]
4-20 March 2000 © TOSHIBA TEC