Toshiba DP120F Service Manual page 108

1.4.8 RX Multi Copy
This is to set, on the receiving station, the number of copies of received documents.
(1) Enter the desired number of copies, then press the [ENTER] key.
RX MULTI COPY
COPY NUMBER =(01-99)
COPY NUMBER
Up to 99 copies for one received document can be entered.
<Remarks> • When COPY NUMBER is 9 or less, enter two digits by adding a 0 (zero)
• When more than 1 is set here, the setting will be effective to make all re-
• The Collated Print function can be set together with the Receive Multi Copy
• When the residual memory capacity is not enough, this setting will be de-
• When there is no more residual memory capacity remaining during a re-
(2) After the message "OPERATION COMPLETED" is displayed, press the [STOP] key to
return to the Standby Mode screen.
DP120F/DP125F Function Settings
01
before the number.
ceptions thereafter in Memory Reception mode.
function. In this case, data is printed out from the last page to the first page.
activated and the normal reception mode will be regained.
ception in Memory Reception mode, the setting of the Receive Multi Copy
is disregarded and recording will occur in the ordinary recording procedure
with the Page 1 printed first.
[MENU], [4], [3], [08]
4-42 March 2000 © TOSHIBA TEC