Toshiba DP120F Service Manual page 73

(3) During Chain Dialing operations, the digits entered into the DELETE ACCESS DIGIT will
be ignored on dialing when they are encountered in an Abbreviated number or a One
Touch key. If it is not necessary to set the ACCESS DIGIT, just press the [ENTER] key.
DELETE ACCESS DIGIT
ACCESS DIGIT=(MAX10)
DELETE ACCESS DIGIT
Set a number (typically 9-1) if it is necessary to access an outside telephone line. When
a number (max. 10 digits) is entered, press the [ENTER] key. During a Chain Dial opera-
tion, it is not necessary to dial 9-1 on numbers associated with a One Touch or Abbrevi-
ated Number keys, therefore the DELETE ACCESS DIGITs will be ignored when they are
programmed into a One-touch or Abbreviated Number key.
(4) After the "OPERATION COMPLETED" message is displayed, press the [STOP] key to
return the display to the Standby Mode screen.
March 2000 © TOSHIBA TEC 4-7 DP120F/DP125F Function Settings