Toshiba DP120F Service Manual page 465

2.3.5 PC I/F PBA
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1) Remove the PBA unit. (Refer to "2.3.1 PBA Unit.")
(2) Remove the two screws from the PC I/F PBA.
(3) Disconnect the connector from the PC I/F PBA to remove the PC I/F PBA.
(4) Reassemble the components in the reverse order of disassembly.
March 2000 © TOSHIBA TEC
Connector
Fig. 8-2-59
8-45
PC I/F PBA
DP120F/DP125F Removal/Replacement
08-02-59