Print Area - Toshiba DP120F Service Manual

3.4 Print Area

3.4.1 Outline
The print area is the mechanism that prints the image formed on the drum surface, using elec-
trophotography, transfer and fixing processes to create a permanent image.
3.4.2 Electrophotography Process
The electrophotography process consists of four processes described on the following three
pages. The electrostatic discharge process, electrostatic charge process and developer pro-
cess are done in the Developer assembly with Drum unit, and is shown below.
Charger
Discharge lamp
Laser beam
Developer
assembly
Drum
Discharger
Fuser
Transfer charger
05-03-17
Fig. 5-3-17
DP120F/DP125F Mechanical Description 5-20 March 2000 © TOSHIBA TEC