(4)
Remove the one screw from the sensor plate, and remove the sensor plate.
(5)
Release the hooks of the paper empty sensor, and remove the paper empty sensor.
(6)
Rotate the bosses on the sides of the paper empty actuator until they can be released
from the guide. Then, remove the paper empty actuator.
Paper empty actuator
(7)
Reassemble the components in the reverse order of disassembly.
NOTE: After reassembling, perform the sensor test referring to the "Chapter 11:
1.5.4 SENSOR TEST" on page 11-20.
DP120F/DP125F Removal/Replacement
Fig. 8-2-131
Paper empty sensor
Fig. 8-2-132
8-104
Sensor plate
March 2000 © TOSHIBA TEC
08-02-131
08-02-132