2.2.13 TX Motor Gear Assembly
Before disassembling or reassembling, be sure to refer to "1. Before Disassembling or Reas-
sembling."
(1)
Remove the TX motor. (Refer to "2.2.12 TX Motor.")
(2)
Open the scanner cover, and remove the one screw from the top cover.
Top cover
(3)
Release the cable from the two cord clamps.
(4)
Remove the four screws from the TX motor gear assembly, and remove the TX motor
gear assembly.
TX motor gear assembly
Cord clamp
DP120F/DP125F Removal/Replacement
Scanner cover
Fig. 8-2-48
Fig. 8-2-49
8-36
08-02-48
08-02-49
March 2000 © TOSHIBA TEC